Renovation terrace and patio : your outside will be a facelift with paint and stencils

If you have paving stones concrete old and waste in your garden and you want to make it more beautiful, then, this article is for you ! Our editorial offers a simple solution for renovation, terrace or patio, which does not need to spend a fortune. These are stencils of soil reusable, which have the ability to completely transform your space from dull to fabulous. Finally, you will add furniture and settle in. Need inspiration ?

Renovation terrace concrete with stencils and paint in a few simple steps

Cleaning of the concrete surface

Do not underestimate this step ! In reality, it is very important to make sure that your tiles outdoor or your yard and concrete are cleaned well. If this is not the case, the paint may not adhere properly and flake off with time. So invest the time and effort to remedy this problem beforehand.

For this purpose, you can use a cleaner in an aerosol-based bleach, hot water containing washing-up liquid, some récureurs and sponges. Start by spraying the surface and allow the product to penetrate. Then, scrub with warm soapy water. You may have to repeat this operation two times in the dirt of your paving stones.

Cleaning of the concrete surface

The Application of a base

Once the concrete is dry, you can proceed with the application of a paint contrasting on the grounds that you want to add. A crisp white will do the trick in all cases after us. The painting of masonry is an exterior paint designed for the surface coarse such as brick and concrete, which remains unchanged for a very long time.

How to use a stencil ?

First of all, of course, choose a design. In fact, there is a large selection of patterns in the trade – geometric, modern, moroccan, indian, scandinavian and mediterranean countries. Whatever your style, you’re sure to find something that you’ll love !

The next step is to begin the painting. In addition, it is advisable to experiment, first and foremost, in an area that will not be exposed and can be easily covered furniture, or pots of flowers if you make a mistake.

If your concrete slabs are relatively new and smooth, you can try using a small foam roller dense for stencil. If, however, you have to deal with the old cracked concrete and rough, it is a good idea to invest in a great brush stencil. Don’t be tempted to use a brush normal because you need to flat hairs to allow a movement of the knife. Whatever you do, do not brush the paint like you would paint a wall. Otherwise, the paint will drip under the stencil and you will get a stained image uneven concrete.

When you are satisfied with the positioning of the stencil, use adhesive tape to hold it in place. Before applying the paint, also made the roller or the brush switch on a paper towel to ensure that there is not too much paint on it. You should in no case be paint dripping under the boss. Then, with a very slight pressure, color in the desired pattern.

Renovation terrace with a mat standing stencil

As soon as you are satisfied with the result of the first application of the stencil, peel it and reposition it so that the pattern overlaps on the edge. It is important that you be precise, since a small deviation can accumulate on several grounds. In addition, the paint dries almost immediately and you will not be able to react to correct.

After having filled up evenly all the gaps, carefully remove the template and you’ll end up with a pretty impression on your flooring.

Application of the stencil in the corners and nooks

When you reach a wall, the process is quite simple. First, cover the edge with masking tape, then press the stencil with one hand towards the bottom and tap the brush into the corner. If the stencil must dress up multiple angles, you’re only one edge at a time, using the same technique. This seems a little daunting, but it really is easy. A brush little help, but it does not need to be perfect (well, he is an outdoor space !)

How to clean the stencil ?

Actually, your boss will probably need to be cleaned up mid-project. When too much paint builds up on it, it flows under the stencil, which creates lines spotted not very pleasant, of course.

For paints, emulsion and chalk, we recommend that you soak very regularly the stencil in warm soapy water, very warm until the color comes off easily. This is necessary because the painting of masonry is much more robust and could be a little tougher to clean. However, be careful not to rub too hard as this may damage your stencil. Account, you do not necessarily need to remove all the paint, just make sure that the edges of the pattern are free of any accumulation.

Понравилась статья? Поделиться с друзьями:
Interior. Lots of photos
0 0 голоса
Рейтинг статьи
Уведомить о
0 комментариев
Межтекстовые Отзывы
Посмотреть все комментарии